With 6 cylinders, Transmission Type of direct drive power shift and max power of 150 hp, our cat 140G is built by Caterpillar in great quality. Its engine model is 3306, 150hp Net Power Gear 5-6, 638cu in Displacement, 12.1ft in Moldboard Width and 27822.4lb Std Operation Weight in Total.
| SPECIFICATION | DESCRIPTION |
|---|---|
| Brand | Grader Cat 140G |
| Category | Grader |
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | 3306 |
| Net Power Gear 5-6 | 150hp |
| Max Power | 150hp |
| Displacement | 638cu in |
| Hydraulic System Fluid Capacity | 18 gal |
| Std Operation Weight - Total | 27822.4 lb |
| Oil System Fluid Capacity | 7.8 gal |
| Fuel Capacity | 75.1 gal |
| Fuel Tank | 12.5 gal |
| Tire Size | 14x24 10PR |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 40 amps |
| Articulation Angle | 50 degrees |
| Turning Radius | 24 ft in |
| Transmission Type | direct drive power shift |
| Number Of Gears - Forward | 6 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 25.5 mph |
| Max Speed - Reverse | 25.5 mph |
| Wheel Lean | 18 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2.1 ft in |
| Moldboard Width | 12.1 ft in |
| Moldboard Height | 24.1 in |
| Moldboard Thickness | 0.9 in |
| Max Depth Of Cut | 17.3 in |
| Side Shift Left | 26 in |
| Side Shift Right | 26 in |
| Pump Type | closed-centre, constant-presure system w/ variable displacement piston pump |
| Pump Flow | 51 gal/min |
| Relief Valve Pressure | 2150 psi |
| Diameter | 60.3 in |
| Rotation | 360 degrees |
| Shift Left | 25.6 in |
| Shift Right | 20.5 in |
| Max Reach Outside Tires - Left | 77.2 in |
| Max Reach Outside Tires - Right | 72.1 in |
| Max Lift Above Ground | 18.3 in |
