Brand | Grader Cat 120H |
Category | Grader |
Number Of Cylinders | 6 |
Net Power Gear 4-6 | 125 hp |
Engine Make | 2236 |
Engine Model | 3116 DITA |
Power Measured | 2000 rpm |
Torque Measured | 1400 rpm |
Max Power | 140 hp |
Net Power Gears 7-8 | 140 hp |
Displacement | 402.8 cu in |
Fuel Capacity | 75.1 gal |
Aspiration | turbocharged |
Std Operation Weight - Front Axle | 7880 lb |
Std Operation Weight - Rear Axle | 19720 lb |
Hydraulic System Fluid Capacity | 18 gal
|
Std Operation Weight - Total | 25040.2 lb
|
Oil System Fluid Capacity | 6.1 gal |
Fuel Capacity | 89.9 gal |
Cooling System Fluid Capacity | 10.6 gal |
Rear Diff/Final Drive Fluid Capacity | 12.5 gal |
Circle Gearbox Fluid Capacity | 1.9 gal |
Tandem Case Fluid Capacity (Each) | 13 gal |
Tire Size | 13-24 (10 PR) (G-2) |
Operating Voltage | 24 V |
Alternator Supplied Amperage | 35 amps |
Articulation Angle | 20 degrees |
Turning Radius | 23.7 ft in |
Transmission Type | direct drive, powershift |
Number Of Gears - Forward | 8 |
Number Of Gears - Reverse | 6 |
Max Speed - Forward | 26.5 mph |
Max Speed - Reverse | 21 mph |
Wheel Lean | 18 degrees |
Oscillation - Total | 32 degrees |
Ground Clearance | 2 ft in |
Moldboard Width | 12.1 ft in |
Moldboard Height | 24.1in |
Moldboard Thickness | 0.9 in |
Max Depth Of Cut | 30.6 in |
Side Shift Left | 20.7 in |
Side Shift Right | 26 in |
Blade Pull At Max Weight | 23503.5 lb |
Blade Down Pressure | 20062.1 lb |
Pump Type | Axial Piston |
Pump Flow | 39.1 gal/min |
Relief Valve Pressure | 3500 psi |
Diameter | 60.3 in |
Rotation | 360 degrees |
Shift Left | 24.7 in |
Shift Right | 24.8 in |
Max Reach Outside Tires - Left | 72.5 in |
Max Reach Outside Tires - Right | 75.3 in |
Max Lift Above Ground | 18 in |
Blade Tip Angle - Front | 40 degrees
|
Blade Tip Angle - Rear | 5 degrees |